|
|
 
Call
Analyser
Our Call
Analyser is much more than just a software for protocol
decode. It analyses all events as a complete flow of
messages and can therefor analyse all events in the network.
It is the ideal tool for trouble-shooting and optimising of
networks. For detailed analysis of the network the Call
Analyser can also make call trace across several interfaces
such as MAP, ISUP and A interface thus allowing the user to
investigate the total behaviour of a switch.
The Call Analyser can be used for GSM, SS7, GPRS
and UMTS protocols and support the file format from any
conventional protocol instruments.
 
The ultimate Protocol Analyzer for
Second and Third Generation Mobile Networks
Designed to meet the needs of Cellular
network operators and Wireless equipment manufacturers, the 3GMaster
provides testing capabilities for installation and commissioning,
network troubleshooting and maintenance, billing verification, and
Quality of Service analysis. The 3GMaster incorporates an easy-to-use
operator interface with the capability to run 3 different tests and
operate with 8 different users simultaneously.
Highlights
 Full
coverage of all A and A-bis interfaces for GSM Phase 2 and 2.5,
including proprietary O&M parts
- All-in-one analyzer for monitoring the
Mobile Signaling and User traffic
- Comprehensive analysis over all Gx
interfaces for GPRS
- Support for UMTS Control Planes and
Mobile Application Part 3G
- Call Detail Record for GSM, CDMA,
GPRS, and UMTS protocols
- Full protocol trace and IP support
- Multiple tests for simultaneous
monitoring across multiple interfaces and protocols
- Voice Over IP Protocol Analysis
- Call Completion Analysis
- Portable and rackmount configurations
available
- Interfaces include: E1/T1,
10/100Base-T Ethernet , and ATM OC3/STM-1
Supported Protocols
| |
GSM
- A interface
- Abis interface
- Proprietary O&M
- MAP
UMTS
|
|
GPRS
- Gb
- Gs
- Gn/Gp (Tunneling)
- Gi
- Gr
- Gf
- Gc
- Gd
- Proprietary PCU on Abis
|
|
SS7
- ANSI and ITU ISUP
- INAP, INAP+, AIN
VoIP
|
The Ultimate VoIP-PSTN Network Analyzer
The evolution to the new network
architecture requires a similar evolution in test equipment. Expertise
in LAN or PSTN alone is not sufficient to meet the challenges of the
converged network. Sunrise Telecom's NeTracker offers an integrated tool
to fully verify, monitor, and troubleshoot the signaling and services
deployed over PCM, ATM, and LAN networks. The protocols supported
include: SS7, ISDN, H323, SIP, MGCP, Megaco/H248, Fax over IP, Sigtran,
IP, and Datacom.
Highlights
- Protocol analysis and troubleshooting
- PESQ/PSQM QoS Testing
- Call and Service Simulation and
Monitoring
- Call Origination and Termination over
two different protocols
- Service Level Agreement and Billing
verification
- Very High-Volume Signaling Calls
Simulation
- Statistics collection for Network
Performance Analysis
- Traffic analysis with simultaneous
Call and Data Packet Volume calculation
- Problems detection and prevention
- Maintenance and Installation
activities
- Network’s usage analysis
 
The Solver is a test solution
designed to enable 2.5 and 3G equipment manufacturers and network
operators to deliver complex digital telecommunications equipment and
services more quickly and cost-effectively, while helping to ensure
interoperability and reliability. Solver assists in the design,
integration, installation and acceptance testing of 2.5 and 3G
telecommunications equipment and services.
SOLVER APPLICATIONS
The principal applications of the SOLVER system are simulation, load
and stress testing, conformance testing and monitoring. All functions
are performed via a user friendly GUI, providing a minimum start-up
period for new users.
SIMULATION
The simulation function of the SOLVER system enables it to act like
one or more network devices, emulating their actions and responses. By
simulating various network devices, such as digital switches, network
access nodes and network databases, the Company's products assist
engineers to cost-effectively develop equipment that will be
compatible with the networks within which they will be deployed. This
helps ensure that equipment will interoperate reliably, thereby
reducing costly failures after installation.
LOAD AND STRESS TESTING
Load and stress testing enables the SOLVER system to verify that a
device under test can successfully handle its designed traffic
capacity and that its performance will degrade gradually, rather than
fail completely, when stressed beyond its specifications. SOLVER is
capable to initiate and maintain high traffic volumes.
CONFORMANCE TESTING
The SOLVER system tests for conformance by enabling manufacturers and
network operators to verify that devices meet specified standards
through TTCN. Conformance test suites validate the implementation of
new features and the functionality of existing features against the
standardized TTCN set of predefined criteria.
MONITORING
The SOLVER system can monitor network links and stores network
activity information for future analysis, typically without affecting
network traffic. By collecting and analyzing traffic, the SOLVER
system helps to ensure that the link has been brought into service and
that the devices connected by the link are functioning properly. The
SOLVER system can simultaneously monitor multiple links, each of which
may be using different protocols.
|
|
Kurser
